Our rectangular drop-in stainless steel burner pan kits come complete with everything you need to build your NG or LP outdoor fire pit project. Our unique drop-in style burner allows you to build the perfect fire table. Our 304 stainless steel burner pan has a 1.25” edge around the perimeter to support its self in your cut-out.

After you build your "structure", make your cut-out a 1/4" larger than the pan you chose and simply drop our burner pan into the cut-out. The 1.25" lip around the pan will support the burner pan in your cut-out. Finish it off by filling the pan with our Dreffco Fire Glass Crystals and you’re done. All your plumbing is hidden inside and out of sight for a professional look.

We strongly recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.

18" Stainless Steel Drop-In Burner Pan 18"L x 6"W x 2.5"H (Plus an Additional 1 1/4" Flange All Around) Approx. 70,000 BTU 1/2" NPT Hub Requires 14lbs of Our Fire Glass Crystals 24" Stainless Steel Drop-In Burner Pan 24"L x 9.75"W x 2.5"H (Plus an Additional 1 1/4" Flange All Around) Approx. 100,000 BTU 1/2" NPT Hub Requires 20lbs of Our Fire Glass Crystals 30" Stainless Steel Drop-In Burner Pan 30"L x 12"W x 2.5"H (Plus an Additional 1 1/4" Flange All Around) Approx. 150,000 BTU 1/2" NPT Hub Requires 25lbs of Our Fire Glass Crystals 36" Stainless Steel Drop-In Burner Pan 36"L x 12"W x 2.5"H (Plus an Additional 1 1/4" Flange All Around) Approx. 150,000 BTU 1/2" NPT Hub Requires 30lbs of Our Fire Glass Crystals