Dreffco Stainless Steel Drop-In Square Burner Pan
Our square drop-in stainless steel burner works with NG or LP. Our unique drop-in style burner allows you to build the perfect fire table. Our 304 stainless steel burner pan has a 1 1/2” edge around the perimeter to support its self in your cut-out.
After you build your "structure", make your cut-out a 1/4" larger than the pan you chose and simply drop our burner pan into the cut-out. The 1 1/2" lip around the pan will support the burner pan in your cut-out. Finish it off by filling the pan with our Dreffco Fire Glass Crystals and you’re done. All your plumbing is hidden inside and out of sight for a professional look.
The burner oval is raised slightly higher than the pan top edge in order to keep heat away from your finished top i.e. granite, tile, ect. Simply mound your glass slightly to cove the burner tube.
We strongly recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.
22 3/4" Stainless Steel Drop-In Square Burner Pan 22 3/4"L x 22 3/4"W x 1"H (Plus an Additional 1 1/2" Flange All Around, Total with Flange is 25 3/4") Approx. 125,000 BTU 1/2" NPT Hub